[Dhsvm-users] Dhsvm-users Digest, Vol 137, Issue 2
Ed Salminen
salminen at watershednet.com
Tue Jun 13 11:45:40 PDT 2023
Sometimes the FILL_SINKS_DHSVM.c program seems to get stuck in an
endless loop and doesn't ever resolve. In those situations I have found
it helpful to take the flow direction grid that the program produces (I
think it is named dir.bin) and use that within a GIS to fill the DEM
using the D4 approach. It seems to fill at least enough of the sinks
that when I run the FILL_SINKS_DHSVM.c program again on the resultant
DEM it often will run to completion. I hope that helps.
On 6/12/2023 4:06 AM, 2330152080 wrote:
>
> Thank you for your reply!
>
> I have adopted your advice. But when I add this option"-D
> DHSVM_D8:BOOL=ON" to the configuration , the result is same as not
> adding this option.
>
> I didn’t know if I have done something wrong. Here is my diagram of
> how to do it. I just add this option to the option section of
> configuration.
>
> And I used the DHSVM3.1.2 version, from the official website.
>
> Of course, I am also trying your other method, but the result has not
> come out yet.
>
> ------------------ Original ------------------
> *From:* "dhsvm-users" <dhsvm-users-request at mailman12.u.washington.edu>;
> *Date:* Wed, Jun 7, 2023 09:20 PM
> *To:* "dhsvm-users"<dhsvm-users at u.washington.edu>;
> *Subject:* Dhsvm-users Digest, Vol 137, Issue 2
>
> Send Dhsvm-users mailing list submissions to
> dhsvm-users at u.washington.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman12.u.washington.edu/mailman/listinfo/dhsvm-users
> or, via email, send a message with subject or body 'help' to
> dhsvm-users-request at mailman12.u.washington.edu
>
> You can reach the person managing the list at
> dhsvm-users-owner at mailman12.u.washington.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Dhsvm-users digest..."
>
>
> Today's Topics:
>
> 1. Re: How to remove the DEM sink (Ed Salminen)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 7 Jun 2023 06:20:19 -0700
> From: Ed Salminen <salminen at watershednet.com>
> To: dhsvm-users at u.washington.edu
> Subject: Re: [Dhsvm-users] How to remove the DEM sink
> Message-ID: <2bde385e-cd98-01d1-a749-6b2dba78dc2b at watershednet.com>
> Content-Type: text/plain; charset="utf-8"; Format="flowed"
>
> The problem may be that you filled sinks in your DEM in a GIS that used
> an eight direction (D8) flow direction approach, but DHSVM uses a four
> direction (D4) approach as described in the snippet you included below.
>
> Did you run the FILL_SINKS_DHSVM.c program to prepare your DEM prior to
> running DHSVM? This will fill the sinks in the DEM using a D4 approach.
> The source code (if you don't already have it) can be found here:
> https://github.com/pnnl/DHSVM-PNNL/blob/master/DHSVM/program/FILL_SINKS_DHSVM.c
>
> Alternatively there now appears to be a way to configure DHSVM to use a
> D8 approach. If you go to this page (https://github.com/pnnl/DHSVM-PNNL)
> and scroll to the bottom under "Experimental Surface/Subsurface Mode" it
> describes how you can enable the D8 approach when building the model
> with CMake.
>
> I hope that helps.
>
> E
>
>
> On 6/7/2023 12:20 AM, 2330152080 wrote:
> > Hello:
> > I find the final surface runoff appears abnormally large in the final
> > mass balance file. You can see the first figure.
> > Although I have read the Q&A about this question, but I really did't
> > know how to resolve it. (fig2)
> > I hope you can give me some advice. Thank you very much for your time.
> > Shutao Wang
> >
> >
> >
> > ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? fig1
> >
> > ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?fig2
> >
> >
> >
> >
> > _______________________________________________
> > Dhsvm-users mailing list
> > Dhsvm-users at u.washington.edu
> > http://mailman12.u.washington.edu/mailman/listinfo/dhsvm-users
>
> --
> Ed Salminen, Hydrologist
> Watershed Professionals Network LLC
> PO Box 8 | Mount Hood Parkdale, OR 97041
> (541) 490-6644
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://mailman12.u.washington.edu/pipermail/dhsvm-users/attachments/20230607/d9f203dd/attachment.html>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: 3A5B992C at C8914517.A72F8064.png.jpg
> Type: image/jpeg
> Size: 83538 bytes
> Desc: not available
> URL:
> <http://mailman12.u.washington.edu/pipermail/dhsvm-users/attachments/20230607/d9f203dd/attachment.jpg>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: 2C06F607 at 8DCEF01F.A72F8064.jpg
> Type: image/jpeg
> Size: 407019 bytes
> Desc: not available
> URL:
> <http://mailman12.u.washington.edu/pipermail/dhsvm-users/attachments/20230607/d9f203dd/attachment-0001.jpg>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Dhsvm-users mailing list
> Dhsvm-users at mailman12.u.washington.edu
> http://mailman12.u.washington.edu/mailman/listinfo/dhsvm-users
>
>
> ------------------------------
>
> End of Dhsvm-users Digest, Vol 137, Issue 2
> *******************************************
>
> _______________________________________________
> Dhsvm-users mailing list
> Dhsvm-users at u.washington.edu
> http://mailman12.u.washington.edu/mailman/listinfo/dhsvm-users
--
Ed Salminen, Hydrologist
Watershed Professionals Network LLC
PO Box 8 | Mount Hood Parkdale, OR 97041
(541) 490-6644
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman12.u.washington.edu/pipermail/dhsvm-users/attachments/20230613/84c64804/attachment.html>
More information about the Dhsvm-users
mailing list